Más recientes archivos |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Información de archivo |
Browsing as Guest |
|
|
A small DPAD-Mod which will add a better pivot to your DPAD.
NOTE: Opening up and modifying the DPAD probably voids your warranty. We take NO responsibility in case you're doing something wrong when modding! |
|
Nombre: |
wizpad.zip |
Fecha: |
24/08/2009 |
Tamaño: |
300.4 KB |
Versión: |
|
Escritor: |
DaveC |
Sitio web: |
|
Descargas: |
5,772 |
Full English Review: |
|
|
|
|
|
Operating Systems: |
GPH WIZ
|
|
|
Connection |
Download Time |
56k Modem |
54.6 secs |
128k ISDN |
23.1 secs |
256k Cable/DSL |
11.1 secs |
512k Cable/DSL |
5.8 secs |
1mbit Link |
2.9 secs |
|
|
|
|
|
la Descarga |
7 los Comentarios |
|
|
Ha Ha!
You gotta be kidding! |
|
|
You could have placed a small blob of glue stick or similar as a spacer on the D-Pad "bald spot" or even place a small blob on the actual board that causes a space/bump raised point where the pad is raised without modding anything I've used glue or glued pieces onto the PCB of the controller for other game systems and it worked. |
|
|
If the original nub was nylon and you've replaced it with a steel pin then you have likely created a serious wear point where the pin sits.
AsTar makes a good point about building up the point beneath the direction pad as well.
It looks like a fiddly job but the results look great.
I hope it works and holds up for you. |
|
|
I used this guide as a point of reference today, but with added a personal tweak. Instead of melting a pin into the pad, I glued a small square of plastic packaging (slightly thinner than a credit card) onto the PCB under the pivot point of the pad.
I found a credit card is too thick, but if you can find some packaging (similar to what most retail electronics come in), cut a piece about 1cm x 1cm, you should be just fine.
|
|
|
|
%%COMMENTFORM%% |
|
|
|
|
|
|
Suministrar energía by
CFiles 2.0-b10
Copyright © 2002-2003 Carrick Information
Technologies |
La mayoría de las descargas |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|