dropbear - ssh server, client and tools

This dropbear server version is edited to accept a root login without a password set (as the Wiz "root" user has no password)
and absolute paths.

It only works when placed on your sd card at "apps/dropbear" and with a working network setup.
Just run dropbear_start.gpe when you network is up.
To stop dropbear run dropbear_stop.gpe.
Use the user "root" to connect via ssh to your wiz and hit return on the login prompt.

I have tested it with a MSI "WLAN 11n USB stick US300EX Lite" (rt3070 chip) in WPA mode.

###################################################################
Info about my wlan configuration:

I used the "Wiz WLAN" package and changed the start script to my needs.

This is my wlan start script. "192.168.72.1" is my router, .14 the Wiz.
#------------start-------------
#!/bin/sh

ROUTERIP=192.168.72.1
WIZIP=192.168.72.14

insmod rt3070sta.ko
ifconfig ra0 inet $WIZIP
route add default gw $ROUTERIP

# check if resolv.conf is already set
if [ `grep -c $ROUTERIP < /etc/resolv.conf` -eq 0 ]; then
    echo "setting dns server"
    echo "nameserver $ROUTERIP" > /etc/resolv.conf
fi

cd /usr/gp2x
./gp2xmenu

#--------------end-------------

I have edited some lines in the RT2870STA.dat file for WPA mode:

SSID=MmyWlanNetworkName
NetworkType=Infra
Channel=0
AuthMode=WPAPSK
EncrypType=TKIP
WPAPSK=MyWpaPassword

I have created a symlink: ln -s /mnt/sd/apps/Wiz_WLAN/ /etc/Wireless
and moved my .dat file to /mnt/sd/apps/Wiz_WLAN/RT2870STA/RT2870STA.dat
so I can keep the .dat file on my sd card.


Ingo Arndt / scachi.
