mshgp32 is a shell for the program gplink.

gplink is a gp32 linking tool for linux.  It should also be possible to
compile it for any platform supported by libusb, though some endian stuff
probably needs fixing for non x86 architectures.

Requirements: Set up usbdevfs: http://www.linux-usb.org/USB-guide/x173.html
When you plug in and switch on your gp32 you should see an extra entry appear
under /proc/bus/usb/<bus number>/

Permissions: For gplink to be able to access the usb bus you need to either:
a) set permissions on usbdevfs to 0666 using an fstab entry like: none
/proc/bus/usb usbdevfs devmode=0666 0 0 b) use gplink as root, or c) use
something like linux hotplug (http://linux-hotplug.sourceforge.net) to manage
the permissions.

A statically linked binary for linux is included in the archive.  To build
gplink requires libusb (http://libusb.sourceforge.net).

******Actualizado en la ayuda******

Paths can be specified in either /gpmm/blah.fxe or gp:\gpmm\blah.fxe format,
but remember to escape backslashes if you use them.

Error recovery isn't too good yet.  If an operation doesn't work you
might have to switch your gp32 off and on for the link command to start
working again.

