Original Post: http://www.deadcoderssociety.tk   
2004 Jouni Korhonen

Ericsson Chatboard to GP32

 Very brief docs.. My chatboard was originally soldered by rbtx99 - so
credits to him for an excellent job!! My chatboard model is CHA-01. Here is
a huge picture how it is wired internally.
 And this is how pins are wired to EXT cable:
 
    EXT-Pin: Meaning: Color:
    1        +3V      orange
    9        Rx       white
    10       Tx       yellow
    18       GND      blue
 
 And some l337 ascii graphics illustrating the EXT connector rear view. This
should help soldering generally. Note that the color codes match to those in
Gamepark IO-port PDFs. 
         EXT  Rear View
           +--------------+
           |              |
     +-----+--------------+-----+
     |      +-+  +-+  +-+  +-+  |
     |      | |  | |  | |  |R|  |   4  - R = red (TDI)
     |      +-+  +-+  +-+  +-+  |   9  - U = blue (UART Rx)
     |  +-+  +-+  +-+  +-+  +-+ |   5  - O = orange (TMS)
     |  | |  |r|  |U|  |O|  |B| |   1  - B = black (Vcc +3.3v)  
     |  +-+  +-+  +-+  +-+  +-+ |   7  - G = green (TDO)
     |       +-+  +-+  +-+  +-+ |   3  - W = brown (nTRST)
     |       | |  | |  |G|  |W| |   18 - E = grey (GND)
     |       +-+  +-+  +-+  +-+ |   10 - M = magneta (UART Tx)
     | +-+  +-+  +-+  +-+  +-+  |   6  - Y = yellow (TCK)
     | |E|  |c|  |M|  |Y|  | |  |   13 - r = RTS
     | +-+  +-+  +-+  +-+  +-+  |   14 = c = CTS
     +----------------+------+--+
                      |      |
                      +------+

