Herian2 Installation instructions:

NOTE: HERIAN2 WILL ONLY WORK FULLY WITH ZDOOM VERSION 1.17 OR
      LATER.  IF YOU DO NOT HAVE ZDOOM THEN YOU MUST DOWNLOAD
      IT NOW.  YOU WILL FIND A LINK TO THE ZDOOM WEBSITE FROM
      WITHIN THE HERIAN2 WEBSITE:
		http://freespace.virgin.net/i.w/
===========================================================

INTRODUCTION:

These instruction are based on the assumption that you already
have ZDoom installed on you PC in a folder called ZDOOM.  If
this is not the case either install ZDOOM in this way or
substitute for ZDOOM the name of the folder on your PC
containing ZDoom.

Herian2 is distributed as a zip file (HERIAN2.ZIP) and must
be extracted into your ZDOOM folder.

Most of the levels are large and the game is designed
primarily with single play in mind.

Herian2 requires an iD Software main IWAD such as DOOM2,
TNT or PLUTONIA in order to run and one of these should also
be in your ZDOOM folder.

Herian2 will not work with DOOM or ULTIMATE-DOOM.

Use INSTH2D2.BAT for installation if you have DOOM2.WAD in
your ZDoom folder.

Use INSTH2P2.BAT for installation if you have PLUTONIA.WAD
in your ZDoom folder.

Use INSTH2T2.BAT for installation if you have TNT.WAD in
your ZDoom folder.

Don't attempt to play Herian2 using any executable other
than ZDoom.  It simply doesn't work.  Herian2 may initially
appear to work possibly with Boom or MBF but you will not be
able to complete the game.  Another point is that ZDoom's
ability to look up and down is a definate advantage for
playing Herian2.  Once your used to it playing without it
gives a very restricted feel to the game.

HERIAN2.WAD will not work until it is processed by the
install programme.
==========================================================

INSTALLATION:

Ensure either DOOM2.WAD, PLUTONIA.WAD or TNT.WAD is in your
ZDoom folder then unzip HERIAN2.ZIP in there.

You will have unzipped the following files -

deusf.exe    - installer
herian2.wad  - to be processed by the installer
insth2d2.bat - installs with Doom2
insth2p2.bat - installs with Plutonia
insth2t2.bat - installs with TNT
herian2.txt  - about Herian2
readthis.txt - this file

plus four shortcuts (see later).

Within Windows95/98/NT Explorer double-click on the
installation batch file (for example INSTH2D2.BAT) and
wait a few seconds until Herian has been processed.

A DOS box will appear telling you what is going on during
installation.

None of your original files will be affected by the
installation of Herian2 if you follow the instructions
properly.

All that you require for playing Herian2 with the exception
of the main IWAD (Doom2, Plutonia or TNT which you must
already own) can be located via the Herian website at
http://freespace.virgin.net/i.w/

You next need to follow the instruction for using shortcuts
for starting Herian2.

==========================================================
SHORTCUTS:

There are four shortcuts prepared for playing Herian2 as
follows:

HERIAN2 - normal Doom weapons, default characters (for
          Herian2) and no background music.

HERIAN2 (MUSIC) - as above but with music (if you have
                  downloaded that option).

HERIAN2 (HRTC) - fantasy weapons and characters (if you
                 downloaded that option).  No music.

HERIAN2 (HRTC MUSIC) - fantasy weapons, characters and Music
                       (if you downloaded those options).

I have enclosed shortcuts for all Herian2 play options within
the zip file.  They will appear in your ZDoom folder when you
unzip the contents of HERIAN2.ZIP and optional ZIP's there.
Provided that you leave all of the contents of this zip file
in your ZDoom folder then they will work if your path is:

C:\ZDOOM\

If not then you will need to modify the properties for these
shortcuts.

The simplest action is for you to copy the shortcuts, one at
a time for the ones that you want to try, from within your
ZDoom folder (do this in Explorer by right-clicking your
mouse on the selected shortcut and selecting "Copy"), then
simply expose the Windows 95/98/NT desktop and paste them
directly there by right-clicking your mouse and selecting
"Paste".

If you need to modify them, for example to change the path,
then after the shortcut appears on your desktop right-click
on it and select "Properties".  You will see sections
called "Start in:" and "Target:".  These are where you alter
the parameters for Herian2's path and options.  For example
if you ZDoom path is:  D:\GAMES\ZDOOM then carefully edit
both of these sections to show the correct path.

By default I have given each shortcut a heapsize of 16 within
the shortcut properties target in order to avoid problems when
playing at high resolutions (such as 800 x 600).  If you play
at a lower resolution (640 x 400 is fine) then this might be
unnecessary so simply change it to 12 or 10.  ZDoom has a
default setting of 8 and in my experience this is fine at
640 x 400 so if this is the resolution that you use then edit
out the -heapsize from the shortcut if you like.  If you get a
"Malloc" error at any time then increase the heapsize again.
==========================================================

PLAYING HERIAN2 FOR THE FIRST TIME:

When you come to play Herian2 for the first time there are
a couple of things that you need to do as soon as
practicable after the starting the first level:

	Press F4 and go to the Gameplay options.

	Use the default settings (v1.17) except for:

	Essential -
	Disable JUMPING.
	Herian2 is not designed to use this feature.  For
        Herian2 it is virtually a form of cheat because in
        places you can use it to bypass sections of some
        levels.  Use it and you might as well play Herian2
        with "NOCLIP" turned on and go walking through the
	walls.  In other words the game becomes pointless.
	Level design to make use of jumping needs a
	fundamentally different approach along the lines
	of Hexen.  Walls, etc. need to be higher in the
	event that you don't want your character to be
	able to jump over them and then in Doom, where
	the player characters tend to be smaller than in
	Hexen you are struggling to looking over that
	wall.

	Thoroughly recommended -
	Enable FALL DAMAGE

When you have made the two changes escape back into the
game and immediately save.  These two alterations will now
be permanent while you enjoy Herian2 (provided that you
always restart Herian2 from a saved game) but will not
affect the preferred settings for your other ZDoom games.
=======================================================

SOME TIPS:

I recommend the following control setup for Herian2:

Use mouse and keyboard.  Even if you are not used to this
try to change.  It is the best way to play first person
perspective 3D games.  I adapted from joypad (a shameful
admission, I know) and in about two hours I was becoming
a much better player.

If you agree do this -

Keyboard:  strafe left  - left arrow key
	   strafe right - right arrow key
	   walk forward - up arrow key
	   walk back    - down arrow key
	   run		- shift key
Mouse:     left click	- shoot
	   right click  - open doors, operate switches, etc.
	   push left    - turn left
	   push right   - turn right
	   push forward - look up
	   pull back    - look down

Basically look upon mouse push/pull as your neck enabling you
to look in any direction.

Remember - Don't Jump or your cheating.  Turn off Fall Damage
and your a wuss.


Ian W.


Title          :   HERIAN2 (revision 0, 24/01/1999)

Filename       :   HERIAN2.WAD

Author         :   Ian Wilson

Email Address  :   i.w@virgin.net

Description    :   Herian2 is fully compatible with only ZDoom
		   version 1.17 or later.

		   Herian2 has a simple story line.  The setting,
                   time-wise, is prior to the fearsome adventures
                   that were seen in Doom and Doom2 the likes of
                   which has never been see again. Many tales have
                   been told since but, with few exceptions, most
                   although.... perhaps interesting, do not have
                   you quaking with fear like the originals.

   	   	   Before the days of Doom many of the characters
                   that we came to know in these tales and those
                   of Heretic and Hexen were closely associated
                   with each other.  Things were different then.
                   During those days the family of Cyberdemons,
                   for example, were closer to their original
                   form before they were modified (not for the
                   first time), due to necessity, for the
                   injuries they endured.  The Imps too were a
                   little different.

		   Your player character is returning from war
                   with a view to settling down to a quieter way
                   of life.  Little did he know that what he had
                   already experienced was only the 
                   beginning.  In this tale he is about to
                   encounter for the first time the Boss of all
                   Bosses, the most fearsome creature ever created.

		   Well, history did go onto show that he did
                   defeat him only for him to rise again, although
                   a little betrayal might just have helped in the
                   end.... but how did he do it.......?
			 

                   32 NEW levels, NEW textures, NEW sounds & NEW
                   monsters

                   All levels were made for single play.
                   Deathmatch and co-operative play is possible,
                   but then forget about the story and just have
                   some fun.  Many of the levels are too large for
                   deathmatch.

Credits to:        iD-software, Raven & Rogue for:
		   Doom, Doom 2, Quake, Heretic, Hexen and Strife.
		   The authors of Wintex, WARM, BSP, Windeu, DEUSF
                   and Wad Author.
		   Thanks to Randy Heit for ZDoom.  For me his work,
                   especially, has given Doom a new lease of life.
================================================================

* Play Information *

Game                    : DOOM II
Episode and Level #     : MAP01-MAP32
Single Player           : Yes
Cooperative 2-4 Player  : Yes
Deathmatch 2-4 Player   : Yes
Difficulty Settings     : Yes
New Sounds              : Yes
New Graphics            : Yes (and no sky problems at high
                               resolution.  No need to stretch)
New Music               : Yes (as an option, but its not my work.
                               See below)
Demos Replaced          : Yes

The music is one of two optional features of Herian2.  It is the
NIN.WAD and it influence much of Herian2's level design,
especially in the first half of the game.  At this time Herian2
was not dedicated to ZDoom and consequently would not have included
ambient sounds as it now does.  Some of you might consider that
backing music will clash with the ambient sounds and that is why it
became an option.  Here's a tip if you do use it.  Turn the music
volume down fairly low in relation to the volume for sound effects
and you will find that it doesn't clash with the ambient sounds.
Change the music volume by means of your Windows 95/98 midi volume
slider control. Do this by double-clicking on the "Loudspeaker"
icon at the bottom-right of your PC desktop.

I would like to credit the person(s) who produced the NIN.WAD but I
don't know who it is.  If the person(s) reads this then thankyou.
It is superb music.  It remains in its original form except for the
addition of a mapinfo lump for compatibility with Herian2.  For
identification I have renamed it H2-NIN.WAD and is contained in the
file H2-NIN.ZIP.

The second option is to cater for those (like me) who also like
Heretic and Hexen as much as Doom.  These are changes to sprites
(characters, weapons and artifacts) that are much more influenced
by Heretic and Hexen.  The graphics option is H2-HRTC.WAD and is
contained in a file called H2-HRTC.ZIP.

* Construction *

Base                    : New level design from scratch.
                          Exceptions - one was influenced by, but
                          not copied from, my favourite Doom2 level.
                          Same with one secret level that was
                          influenced by a Hexen level.  Another
                          secret level is based on an original
                          Herian level that was popular called (Isle
                          City).  It has been enhanced with better
                          textures, ZDoom features and some changes
                          and improvements to gameplay.

Editor(s) used          : Wintex, WARM, BSP, Windeu and Wad Author.

Known Bugs              : None that I know of.  I have hopefully
                          fixed them all since play-testing.

Herian2 was developed for ZDoom only and should be played at 640 by
400 screen resolution (best for avoiding elongated pixels that
should really be square).  If your graphics card has the facility
to set up monitor profiles (like the Matrox Mystique) then you can
make adjustments to ensure that your preferred resolution shows
square pixels at other resolutions such as 640 x 480 or 800 x 600.
It's all to do with the ratio of width to height.  Originally Doom
ran at 320 x 200 pixels but I'm afraid that's barely acceptable
nowadays.  640 x 400, having the same ratio, is very acceptable.
If you have a powerful enough PC (P2-300) and can set up the
monitor profile for 800 x 600 then it's almost as nice as GLDoom is
at 640 x 480.....Well, not quite.  If you are fortunate enough to
have a P2-350 or above then you will likely be able to play
acceptably at 1024 x 768 thanks to ZDoom.  I have done that and it
is very nice.			 
			   