U-Boot Updater version 1.3, for U-Boot version 2.0.0
Robster (rob@cobbleware.com)

Note that this updater ONLY updates U-Boot, so after you have done this,
you'll still need to run GPH's update utility.

The standard disclaimer applies:
You follow this process at your own risk. I will not accept responsibility for
any damage to your GP2X arising from following this process. It IS possible
that this process will make your GP2X unusable, and you must accept this risk
before following the process.

Instructions:

1) Obtain the Firmware 2.0.0 update package for the GP2X

You can download this from www.gp2x.com, which requires a login, or from 
gp2x.de which does not require a login:

      http://archive.gp2x.de/cgi-bin/cfiles.cgi?0,0,0,0,42,1472

The filename is gp2x-f100_200_060428.zip. Unzip this file, and check that the
following files are created:

gp2xboot.img
gp2xkernel.img
gp2xyaffs.img
gp2xfs.tar.gz
gp2xnand.tar.gz
GPL.txt
LGPL.txt
License.txt
gp2xsound.wav

2) Copy update files to the *root directory* of your SD card

The following files are needed:

gp2xkernel.img
gp2xyaffs.img
gp2xfs.tar.gz
gp2xnand.tar.gz
gp2xsound.wav

You do not need to copy gp2xboot.img, or the text files.

3) Update U-Boot

Copy uboot200.bin and uboot200.gpe to the *root directory* of your SD card,
turn the GP2X on, and then run uboot200.gpe from the "Game" menu. When this has
completed, turn the GP2X off, leave it for 15 seconds, and then turn it on
again.

When the update has been successful, the black U-Boot screen will say
"firmware v2". With U-Boot updated, the kernel will not boot.

2) Let U-Boot update the rest of the system

Turn the GP2X off, wait 15 seconds, and then HOLD DOWN THE SELECT AND START
BUTTONS while you turn the GP2X on again. The update process will start, first
with an "update in progress" graphic and then with a "patching in progress"
graphic. Once this is completed, turn the GP2X off, wait 15 seconds, and turn
it on again.

All done! Your update is complete, and you can remove all of the above files
from your GP2X. If you had a failure, try booting anyway, but if it doesn't
work, you will need to follow DJWillis' unbricking guide.
