Kernel Updater version 1.2, for Kernel version 1.4.0
Robster (rob@cobbleware.com)

Note that this updater ONLY updates the kernel, so after you have done this,
you'll still need to run GPH's update utility.

The standard disclaimer applies:
You follow this process at your own risk. I will not accept responsibility for
any damage to your GP2X arising from following this process. It IS possible that
this process will make your GP2X unusable, and you must accept this risk before
following the process.

Instructions:

1) Update the kernel

Copy kernel140.bin and kernel140.gpe to the *root directory* of your SD card,
and then run kernel140.gpe from the "Game" menu. When this has completed, turn
your GP2X off, leave it for 15 seconds, and then turn it on again.

When the update has been successful, the green GP2X booting screen will have a
light-coloured border around the outside, and "Firmware Ver - 1.4.0" in small writing
in the centre of the screen.

2) Update the media player etc.

Run GPH's update: copy "gp2xpatch-1.4.0.gpu" and "gp2xpatch-1.4.0.tar.gz" to your
SD card, and then run gp2xpatch-1.4.0.gpu from the "Utility" menu.

All done! Your update is complete, and you can remove all of the above files
from your GP2X. If you had a failure, try booting anyway, but if it doesn't
work, you will need to follow DJWillis' unbricking guide.

