Welcome to the Help of G(P)=2X, the functionploter for the GP2X.

Before I start, I say sorry for my bad english... I hope it's enough to understand, what I mean.

Index


1. The Mainmenu

Here you see an (German) example for a menu:

With the stick you can select any function. These selected function is marked with an arrow on the right side. With (A) you can create a new function, with (B) you can edit the selected function and with (X) you can delete it. If you press both shoulderkeys, the program ends. With (Select) you can mark a function as selected. You see the whether the function is marked or not by the little dot in left of the number of the function. Only as selected marked function will by drawn, if you press (Start) to draw all functions. With the volumcontroller you can change the color of the graph of the function. With (Y) you enter the Calculatormode. The mode is similar to creating or editing a function, but you can't draw a graph, the term will not be saved and lost by ending the Calculatormode. You only can solve a term. With (R) you can go the optionmenu.

2. Create a function


The control is a little bit difficult, but if you begin with unterstanding the system, it will be a fast work. Let's go: With the Shoulderbuttons you can select, which things you use at this time. What group is selected, you see on the right side inside the "<>". With the Stick you can choose a thing now and with (B) you can selected it. Now you see it above behind the "f(x)=". If you halt pressed (Y) and press also (L) or (R) (The Shoulderbuttons), you can move in the function and edit things inside the function. With (A) you delete the thing in front of the cursor and with (X) you delete anything. With the Volumecontrol you can make brackets. Attention: All functions ,like "sine", "cosine" and so on, must be finnished with a closed bracket. A number you can add with (Select). Now you are in the "Number-Edit-Mode". With the Stick you can select a digit an with (B) you set these cypher. With (Y) you can make a comma, with (X) you can delete the whole number, with (A) you can change the algebraic sign, with pressing of the stick or (L) you can add the digit "zero" and with pressing (Select) again or (R) you end the "Number-Edit-Mode". With (Start) you go to a little menu, where you may decide to draw the function with (A), to solve the term with (B), to do nothing (cancel) with (Y) or to go back to the mainscreen with (X).You can finish editing a function also with pressing the shoulderbuttons at the same time, but be attentive: There will be no routine to search error. If there is an error, the function will NO T ne drawn be pressing (Start) in the mainmenu. Now a table with the things, you may choose, an example and a little illustration:
selectable element example illustration
for all
x 5*x+3 Gives back x. Important for functions
Standard
+ 3+5 Summates with the Operator Preceedence Rules
- 3-5 ^Subtracts with the Operator Preceedence Rules
* 3*5 Multiplys with the Operator Preceedence Rules
/ 3/5 Divides with the Operator Preceedence Rules
* 3^5 Raises to the power with the Operator Preceedence Rules
int int(3.5) Deletes the decimal places. ("Integerfunction")
abs abs(-3) Makes the modulus of the argument
mod 5mod3 Gives the rest of a division back with the Operator Preceedence Rules. ("modulofunction")
Angles (all arguments in radian!)
sin sin(3*pi) Gives back the sine of the argument.
cos cos(0) Gives back the cosine of the argument.
tan tan(pi/2+0.1) Gives back the tangent of the argument.
cot cot(42) Gives back the cotangent of the argument.
act act(100) Gives back the arc cotangent of the argument.
asi asi(0.35) Gives back the arc sine of the argument. Attention: the domain is [-1;1]!
aco aco(-0.35) Gives back the arc cosine of the argument. Attention: the domain is [-1;1]!!
ata ata(0) Gives back the arc tangent of the argument.
Extended
ln ln(0.3) Gives back the natural logarithm of the argument.
log log(e) Gives back the decimal logarithm of the argument.
e e^x Gives back the Euler number e (approx. 2,718281828459)
sqr sqr(256) Gives back the square root of the argument.
rnd rnd(50.6) Gives back the rounded value of the argument.
pi pi*x Gives back pi(approx. 3.14159265358979)
sgn sgn(x) If the argument is less than 0, the value is -1, if the argument is equal zero, the value is zero too and, if the argument is greater than 0, the value is 1. ("signum function")
n! n!(10) Gives back the factorial of the argument.
Navigator
M+ Gives M the value of the solution
Anf Goes to the begin of the function
A2M Replaces the values of the Solution and M.
<- Goes in the function one to left.
-> Goes in the function one to right.
RM M*x Gives back M.
End Goes to the end of the function.
Ans Ans/2 Gives back the Solution.

3. Edit a function

Editing a function is actual the same like creating a function, the different is in the names: one creates functions, one edits the selected function.

4. Draw a function

Here you see a few graphs as example

All in the menu selected functions, the function you are creating or the function you are editing, are drawn here. With (A) you can zoom. If you press (A) there will be a cursor. Set the cursor at this point, that should be the new left upper corner and press (A) again. Now you can set the cursor to the new right lower corner and press (A) the last time. Now yoe will see the zoomed version of your functions. If you set the new left upper corner and the new right lower corner at the same point, there will be no zooming. With (B) you can zoom out and (Y) sets the coordsystem back to the standard status. With (L) you can switch between the Modes "Move" and "Show" . In the Mode "Move" you can move the system with the movement steps, which are editable in the optionmenu in percent and to see on the right, with the stick. In the Mode "Show", you see a cursor, which can be controlled by the stick. On the right you see the position of the cursor. If you zoom now, the first step of Selecting the left upper corner will be done. The left upper corner will be at the place of the cursor. All cursors (zoom and in mode show) can be moved with 3 speeds, which you can selected with the volumecontrol. The optionsmenu can be displayed with (R). With (X) or (Start) you can end drawing functions.

5. The optionmenu

At this time here you only can set the movement steps in percent and the language. With "Back", (X) or (Start) you can finish that.

6. FAQ

blank yet....

7. Imprint

First I thank IceOnly for his cool Icon for G(P)=2X. All rights referring to this reserved to him.
G(P)=2X was written by Alexander Matthes in 2006 for the GP2X
If you change my program and make it publicly available, please told me that.
All rights reserved.
contact: cyberpuer@mcmc-software.com
If you have questions, problems or suggestions, you can mail me or write in the (german) GP2X-forum:
GP2X-Forum, there in the betasection in the G(P)=2X-Thread.

There are many grammatical and language mistakes and the ortography is a bad joke, I know. You are invited to translate the german version in a better english...